Design of a bidirectional energy buffer using a switched-capacitor converter and supercapacitors for an auxiliary EIS converter for fuel cell stacks

Fuel cell as an attractive clean energy source has gained a great deal of interest. To increase the durability and reliability of fuel cells, diagnostics systems that can detect degradation and faults inside fuel cell stacks in end applications are highly in need. Electrochemical impedance spectroscopy (EIS), among other methods, is a promising characterizing tool for diagnostics and condition monitoring of fuel cells. It was traditionally only applied to single-cell or short stacks at low-power levels and required special laboratory equipment, but was recently brought to high-power stacks too which was made possible by many technological advancements. This is mainly owing to a growing interest in performing in situ EIS as a non-destructive method without the need for dismantling the stack. Unlike traditional approaches which relied on extra equipment, converter-based EIS provides attractive solutions for this purpose. In this thesis, the design and utilization of a bidirectional energy buffer module composed of a switched-capacitor converter (SCC) and a supercapacitor string for a new auxiliary EIS converter solution is presented. The module is designed towards having a more compact auxiliary converter unit. The design of the proposed energy buffer module is investigated in detail and a guideline is provided considering the application-specific optimal conversion ratio, supercapacitor string capacitance, and the probable limitations imposed by high EIS frequencies on certain situations. In a nutshell, the proposed switched-capacitor converter module (SCCM) consists of a bidirectional high voltage-gain SCC connected with supercapacitor string helps with the compactness and miniaturization of the entire auxiliary EIS converter and eliminating the potential problems of electrolytic capacitors such as bulkiness and limited lifetime due to the impact of ripples. The SCCM energy buffer with a high voltage gain offers a high buffering ratio for utilizing supercapacitors as the energy storage device.