"Body-In-The-Loop": Optimizing Device Parameters Using Measures of Instantaneous Energetic Cost

Peer reviewed: 
Yes, item is peer reviewed.
Scholarly level: 
Faculty/Staff
Final version published as: 

Felt W, Selinger JC, Donelan JM, Remy CD (2015) "Body-In-The-Loop": Optimizing Device Parameters Using Measures of Instantaneous Energetic Cost. PLoS ONE 10(8): e0135342. doi:10.1371/journal.pone.0135342

Date created: 
2015
Keywords: 
Polynomials
Optimization
Medical devices and equipment
Oxygen consumption
Algorithms
Bioenergetics
Prosthetics
Sensory physiology
Abstract: 

This paper demonstrates methods for the online optimization of assistive robotic devices such as powered prostheses, orthoses and exoskeletons. Our algorithms estimate the value of a physiological objective in real-time (with a body “in-the-loop”) and use this information to identify optimal device parameters. To handle sensor data that are noisy and dynamically delayed, we rely on a combination of dynamic estimation and response surface identification. We evaluated three algorithms (Steady-State Cost Mapping, Instantaneous Cost Mapping, and Instantaneous Cost Gradient Search) with eight healthy human subjects. Steady-State Cost Mapping is an established technique that fits a cubic polynomial to averages of steady-state measures at different parameter settings. The optimal parameter value is determined from the polynomial fit. Using a continuous sweep over a range of parameters and taking into account measurement dynamics, Instantaneous Cost Mapping identifies a cubic polynomial more quickly. Instantaneous Cost Gradient Search uses a similar technique to iteratively approach the optimal parameter value using estimates of the local gradient. To evaluate these methods in a simple and repeatable way, we prescribed step frequency via a metronome and optimized this frequency to minimize metabolic energetic cost. This use of step frequency allows a comparison of our results to established techniques and enables others to replicate our methods. Our results show that all three methods achieve similar accuracy in estimating optimal step frequency. For all methods, the average error between the predicted minima and the subjects’ preferred step frequencies was less than 1% with a standard deviation between 4% and 5%. Using Instantaneous Cost Mapping, we were able to reduce subject walking-time from over an hour to less than 10 minutes. While, for a single parameter, the Instantaneous Cost Gradient Search is not much faster than Steady-State Cost Mapping, the Instantaneous Cost Gradient Search extends favorably to multi-dimensional parameter spaces.

Language: 
English
Document type: 
Article
File(s): 
Sponsor(s): 
U.S. Army Research Office Grant
Natural Sciences and Engineering Research Council of Canada (NSERC)
Vanier Canadian Graduate Scholarship
National Science Foundation Graduate Research Fellowship
Statistics: